Paintsrus Floor Paint Logo
Anti-Slip Floor Paint Dog Kennel Horse Stable Box

Product benefits:

Outstanding Anti-Slip properties.

Contains Crumb Rubber for a unique, “Soft feel”

Instant safety to any floor, ramp, steps etc.

Excellnt durability.

Chemical resistant.

Simple to apply on a wide range of surfaces.

FREE delivery to any UK mainland address. (Others at cost, please email for a price)

 

Recommended for use on: 

Dog Kennel Runs      Catteries                   Horse boxes                  Walk-ways                 

Stable floors               Fire escapes            Wash rooms                  Wheel chair ramps

Flat bed trucks           Stable floors             Shower rooms               Swimming pool surrounds

Boat decks                 Jetty                           Inflatable dinghy’s          Rubber pontoons

Factory floors             Tail lifts                      Scaffolding                     Play ground equipment

           

What you are buying:

Contains Rubber Crumbs to give an outsatnding Anti-Slip finish.

This Crumb Rubber gives a, “Soft textured feel” to the dry paint film.

This, “Soft textured feel” provides outstanding grip and anti-slip properties.

Ideal for both interior and exterior use in kennels, catteries and veterinary accommodation.

Highly recommended for use with horses & livestock etc because the, “Soft textured feel” gives instant confidence to the animal on slippery or sloping surfaces and it is non-abrasive.

This paint is also flexible enough to give a smooth ride to fork lift trucks, pallet barrows etc in commercial and industrial environments.

It is waterproof, totally flexible and chemical resistant.

1) How to prepare:

 

This is a professional quality products and for the best results it is important to use the correct preparation for different substrates.

 

Aluminium: 

Lightly abrade the surface.

Apply an Etch Primer prior to applying the paint.

 

Concrete:

For new concrete etch prior to painting.

Old concrete that is clean and dry will not require etching.

 

Fibre glass:

Abrade the surface to remove all glossiness.

Clean with Pre-Wipe KPT00 prior to painting.

 

Ferrous metal:

Un-primed:  Lightly abrade the surface prior to painting.

Primed:       Protecta-Kote adheres well to primed metal.

Galvanised: Etch Primer required prior to applying the paint.

 

Non ferrous metal:

Lightly abrade the surface prior to painting.

Apply an Etch Primer prior to the paint.

 

Plastic:

Lightly abrade the surface.

Apply a Primer for Plastic prior to the paint.

 

Rubber:

Abrade the surface.

Clean with Pre-Wipe KPT00 prior to painting.

 

Timber:

If the surface is smooth, abrade the surface prior to painting.

 

2) How to apply:  

 

For the best results apply two coats.

 

By brush:

a) Apply a generous coat onto the surface.

b) Avoid over brushing as this will cause bald patches.

c) When the first coat is touch dry, apply the second coat at 900 to the first coat.

 

By roller:

a) Use an open foam stipple roller.

b) Apply a generous even coat when touch dry, apply the second coat at 900  to the first coat.

 

Size & coverage:   4 Litres which will cover 5 square metres with two coats.

 

Colours:  Black, Blue, Green & Grey. (If you need to see the colours please let me know and we will email them to you.)

 

How to order:

1) Choose the colour(s) you require from the list above.

2) Order the quantity of tins you require via the listing.

3) Then at the bottom of the Pay Pal form where it says NOTES. Enter the colour(s) you require.

 If you require help deciding:

 

a) Which is the best prepartion for you.

b) Which products you need

c) How much you need.

 

Please send me details of the size of the area you need to paint and what it is made of. 

We will email a list of what you need and, "Step by step" instuctions of how to achive the best result.